27
The Screen Menu
Adjustments and Settings Using a Menu
• A part of the image may be displayed in black, depending on the setting item.
*2: Available when a computer signal is input from the RGB input connector (INPUT A).
*3: If the projected image includes large amount of black portion around it, the APA function will
not work properly and a part of the image may not be displayed on the screen and also optimum
image cannot be obtained, depending on the type of input signal. In this case, adjust the “Phase,”
“Pitch,” and “Shift” items manually.
*4: Available when a computer or a video signal is input from the RGB/YP
BPR input connector
(INPUT A).
*5: When “APA” (page 26) or “Smart APA” (page 29) is performed, the adjusted value for “Pitch”
will return to its factory default. If you want to continue using the adjusted value, set “Smart
APA” to “Off.”
To Next Page
Loading...
