Sony VPL-EW348 - Page 41

41
Using Network Features
Network
(b) Input the settings for Client
Mode.
When the USB wireless LAN module is
activated as a client, set the items for the
client (set the items for the access point
the projector tries to connect to).
Connection Status: Displays the
connecting status between the access
point and projector.
SSID: Input the SSID of access point the
projector tries to connect to.
Encryption Type: Select the security
method of access point the projector
tries to connect to from the following
list.
Key: Input the password for security
method of the access point according
to the selected encryption type as
below;
Obtain an IP address automatically:
Automatically provides the network
settings by a DHCP server function,
such as the router. The IP Address,
Subnet Mask, Default Gateway,
Primary DNS, and Secondary DNS
display the values provided by a
DHCP server.
Specify an IP address: Set the network
manually.
-IP Address: Input the IP address of the
projector.
-Subnet Mask: Input the subnet mask of
the projector.
-Default Gateway: Input the default
gateway of the projector.
-Primary DNS: Input the primary DNS
server of the projector.
-Secondary DNS: Input the secondary
DNS server of the projector.
MAC Address: Displays the MAC
address for USB wireless LAN
module.
Encyption
Type
Descriptions
Open Sets the security method
of the access point to open
system authentication.
WEP 64bit Sets the security method
of the access point to
WEP (64bit).
WEP 128bit Sets the security method
of the access point to
WEP (128bit).
MIX (WPA-
PSK/WPA2-
PSK (TKIP/
AES))
Sets the security method
of the access point to
MIX. (corresponding to
both WPA-PSK (TKIP/
AES) and WPA2-PSK
(AES) security methods).
3-(b)
WPA2-PSK
(AES)
Sets the security method
of the access point to
WPA2-PSK (AES).
Encyption
Type
Password
Open The password cannot be
input.
WEP 64bit Input 5 ASCII characters
for a password.
WEP 128bit Input 13 ASCII characters
for a password.
MIX (WPA-
PSK/WPA2-
PSK (TKIP/
AES)) or
WPA2-PSK
(AES)
Input 8-63 ASCII
characters for a password.
Encyption
Type
Descriptions