Sony VPL-HS20 - MS Board; G Board and Lamp Power Supply Block

1-5
VPL-HS20
1 screw
(+B 3x6)
4 MS board
2 Flat connector assembly (50P)
3 Remove the MS bracket, MS board
in the direction of the arrow.
CN1001
Two claws
Four claws
1-3-6. MS Board
. Remove the C board. (Refer to 1-3-4.)
4 Two screws
(+B 3x6)
7 Two screws
(+B 3x6)
3 Power block assembly
X3
CN600
CN702
CN703
5 Remove the G board
in the direction of the
arrow.
8 Lamp power supply block
Lamp power
supply block
6 G bracket cover
9 Power bracket
CN705
CN706
CN601
X1
1 Three screws
(+B 3x6)
2 Plate (G)
Two claws
1-3-7. G Board and Lamp Power Supply Block
. Remove the C board. (Refer to 1-3-4.)
. Remove the MS board. (Refer to 1-3-6.)