Sony VPL-PHZ10 - Screen Menu Settings

28
The Screen Menu
The Screen Menu
The Screen menu is used to adjust the size, position and aspect ratio of the
projected image for each input signal.
Setting items Item descriptions
Aspect
*1
Changes the aspect ratio of the projected image
(page 30).
VPL-PHZ10/PWZ10:
When the computer
signal is input
4:3: Displays the image to fit the maximum projected
image size with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected
image size with an aspect ratio fixed to 16:9.
Full 1: Displays the image to fit the maximum projected
image size without changing the aspect ratio of the input
signal.
Full 2: Displays the image to fit the maximum projected
image size changing the aspect ratio of the input signal.
Full 3: Displays the image to fit the maximum width or
height, up to 1280 × 720 pixels, without changing the
aspect ratio of the input signal.
Normal: Displays the image on the center position of the
projected screen without changing the resolution of the
input signal or enlarging the image.
VPL-PHZ10/PWZ10:
When the video
signal is input
4:3: Displays the image to fit the maximum projected
image size with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected
image size with an aspect ratio fixed to 16:9.
Full: Displays the image to fit the maximum projected
image size changing the aspect ratio of the input signal.
Zoom: Zooms the center area of a projected image.
VPL-PXZ10: When
the computer signal
is input
4:3: Displays the image to fit the maximum projected
image size with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected
image size with an aspect ratio fixed to 16:9.
Full 1: Displays the image to fit the maximum projected
image size without changing the aspect ratio of the input
signal.
Normal: Displays the image on the center position of the
projected screen without changing the resolution of the
input signal or enlarging the image.
VPL-PXZ10: When
the video signal is
input
4:3: Displays the image to fit the maximum projected
image size with an aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected
image size with an aspect ratio fixed to 16:9.
Zoom: Zooms the center area of a projected image.
Adjust Signal Adjusts the image of computer signal. Use this item if the
edge of the image is cut and reception is bad.