Sony VPL-PHZ10 - Page 76

76
Specifications
INPUT
OUTPUT
(Computer/
video)
INPUT A RGB/YPBPR input terminal: Mini D-sub 15-pin
female, G with sync/Y: 1 Vp-p ± 2 dB, sync negative,
75 ohms terminated, RGB/PBPR: 0.7 Vp-p ± 2 dB,
75 ohms terminated, Sync signal: TTL level high
impedance, positive/negative
Audio input terminal: Stereo mini jack, rated input
500 mVrms, input impedance more than 47 kohms
INPUT B/
INPUT C
HDMI input terminal: HDMI 19-pin, HDCP support,
Audio input terminal: HDMI audio support
VIDEO IN Video input terminal: Phono jack, 1 Vp-p ± 2 dB, sync
negative, 75 ohmes terminated
Audio input terminal: Shared with INPUT A
OUTPUT Audio output terminal: Stereo mini jack, stereo, 1
Vrms (maximum volume, when inputting 500
mVrms), output impedance 5 kohms
Other
terminals
RS-232C terminal: D-Sub 9 pin male
INPUT D HDBaseT/LAN Port: RJ45, HDBaseT/
100BASE-TX
HDBaseT transmittable signal: HDMI (Video, Audio),
RS-232C, Ethernet
HDBaseT LAN cable: STP type (CAT5e or higher,
straight, not supplied), Maximum length: 100 m
USB terminal: Type A
USB terminal: Type B
Operating
temperature/
Operating
humidity
0 °C to 40 °C (32 °F to 104 °F)/20% to 80% (no
condensation)
Storage
temperature/
Storage
humidity
–10 °C to +60 °C (14 °F to 140 °F)/20% to 80% (no
condensation)
Power
requirements
VPL-PHZ10:
100 V to 240 V AC, 4.3 A-1.7 A, 50/60 Hz
VPL-PWZ10/PXZ10:
100 V to 240 V AC, 4.0 A-1.6 A, 50/60 Hz
Power
consumption
AC 100 V to
120 V
VPL-PHZ10: 424 W
VPL-PWZ10: 399 W
VPL-PXZ10: 391 W
AC 220 V to
240 V
VPL-PHZ10: 403 W
VPL-PWZ10: 377 W
VPL-PXZ10: 365 W
Items Descriptions