Sony Walkman NW-E013 - Setting a Preset Volume Value

NW-E013/E015/E016/E013F/E015F/E016F.GB 3-093-019-11(1)
43
43
Settings
Setting a Preset Volume value

Press and hold the /HOME button until the HOME menu appears.

Press the / button to select (Settings), and then press
the  button to conrm.

Press the / button to select “Advanced Settings>,” and then
press the  button to conrm.

Press the / button to select “Volume Mode>,” and then
press the  button to conrm.

Press the / button to select “ Edit>” displayed under
“Preset Volume,” and then press the  button to conrm.
The “Low” value appears selected.

Press the / button to set each value for “Low,” “Mid” or
“High,” and then press the  button to conrm.
With this setting, you can select the set value of the volume level (“Low,”
“Mid,” or “High”) by pressing the VOL +/– button.
To return to the previous menu
Press the /HOME button.
Note

If “AVLS” (

page 44) is set, the actual volume may be lower than the settings.
Releasing “AVLS” (AVLS OFF) returns the volume to the preset level.
Table of
Contents
Index
Menu