Setting up and using memory keys
60
Programming a group facility in an empty memory key
It may be that your system does not support this feature for you. If that is the case, you
will not have access to it.
You can program specific group facilities under a memory key allowing access to the
facility by way of a single key press.
The following group facilities can be programmed under a memory key:
• Absent for most calls
• Absent for group calls
• Incoming intercom is off
• Softring is off
• Status monitoring is off
• Show absent/present status:
• Group facility
• Group member calls
• Group member calls per intercom
• Private calls
• Personal calls
• Executive calls
• Group calls
• Private park
• Group park
• Diversion to alternative secr.
The following function is available in Special mode:
• Line key
You can find explanations for all of these features in the glossary at the back of this book.
To Next Page
