USE AND MAINTENANCE MANUAL
MANUAL DOUGH SHEETER
Mod. SPT0/1-E - SPT3/1-E
Code
3529.0031.01
Revision A
date 06/09/2011
8 Technical Assistance Service - Phone (+39) 0445.595.111 Arc. 86
1.4 TRANSPORT INSTRUCTIONS
A B
PACKAGING DATA
− The machine is supplied on a pallet, in a strapped triple-layer corrugated cardboard box.
MACHINE MOD. TYPE OF PACKAGING WEIGHT KG A mm B mm H mm
SPT0/1-E Pallet and cardboard box 1120 1170 1740
SPT0/1-L-E Pallet and cardboard box 1120 1170 1740
SPT3-1-L Pallet and cardboard box 1120 1170 1740
INSTRUCTIONS FOR TRANSPORT AND UNLOADING
− Loading and unloading from the vehicle can be performed:
− by means of crane, see figure “A”
− by means of forklift truck, see figure “B”.
− The machine must be transported adopting all precautions to prevent damage to the machine.
− In particular the machine must not be placed on top of other materials and vice versa either
during transport or storage.
− During transport the machine must be positioned so that it cannot be knocked by other
materials loaded on the same vehicle.
− Before unloading from the vehicle, check that the packaging is intact and that there is no risk of
tipping over.
− During unloading, place the machine carefully on the ground to prevent it being knocked.
!
CAUTION When handling, pay attention to all the indications on the packaging. The
capacity of the belts must be adequate for the weight of the packages. Do
not use metal belts.
To Next Page
Loading...
