USE AND MAINTENANCE MANUAL
MANUAL DOUGH SHEETER
Mod. SPT0/1-E - SPT3/1-E
Code
3529.0031.01
Revision A
date 06/09/2011
24 Technical Assistance Service - Phone (+39) 0445.595.111 Arc. 86
5.1 MAINTENANCE
Unplug the machine before proceeding with any maintenance or cleaning operation.
Mechanical maintenance
Pict.A3
− Motor belt tension. Once a month check correct tension and condition of the belt.
Electrical maintenance:
− Visually check the power supply cable and plug once a week or whenever it has been rubbed,
knocked or trodden on.
− Check correct operation of the safety grille microswitches by opening and closing them during
movement.
− In the event of electrical faults, contact qualified personnel.
5.2 CLEANING
− For correct operation and hygiene of the machine, the conveyor belts, steel protections and
the four scrapers Figure – a3- must always be cleaned after work.
Figure –a3-
To Next Page
Loading...
