USE AND MAINTENANCE MANUAL
MANUAL DOUGH SHEETER
Mod. SPT0/1-E - SPT3/1-E
Code
3529.0031.01
Revision A
date
06/09/2011
Arc. 86 Technical Assistance Service - Phone (+39) 0445.595.111 29
7.1 SAFETY DEVICES
The function of the safety device is to prevent the operator accidentally inserting his hand in the
calibration cylinders during movement, resulting in crushing.
It is made entirely of stainless steel with two metal sheets shaped at the side to prevent access
and a set of electrowelded stainless steel rods at the top which prevent the operator inserting his
hand but allow him to view the rolling operation. It is surface-treated to facilitate cleaning.
Near the protection rotation fulcrum inside the machine, there is a microswitch which prevents
operation of the machine with the protection open or stops the machine immediately if the movable
protection is opened with the machine running.
A microswitch is connected to each protection.
To Next Page
Loading...
