Spaceman requires that only the specied
refrigerant be used in your machine.
Alternave refrigerants may cause damage to
the cooling system and/or prevent the machine
from operang at opmal performance.
If you require an alternave refrigerant, please
call Spaceman Technical Support for a list of
compable alternaves for your compressor.
• Place on a at, level, and solid surface ed
to the machine dimensions
• Ensure a minimum 152mm (6'') clearance on
the exhaust side (Side or Back)
• Completely clear area of dust, grease, and
airborne parcles
• Place away from hot equipment such as
stoves, frying baskets, ovens, etc.
Failure to comply will
damage the machine and refrigeraon
components and will void all warranes.
Operang in higher ambient
temperatures will result in degraded
performance.
1. Connect all wires to Circuit Breaker (including
neutral & ground bus terminals) or Local Plug ac-
cording to supply voltage and wire codes on ma-
chine power cable.
2. Verify Incoming Supply Cable is wired the same
way on Circuit Breaker or Wall Receptacle before
switching on or plugging in the machine.
The image displayed is for illustraon purpose only and may
dier from the actual product.
To Next Page
Loading...
