1. Verify power switch is in the OFF posion.
2. Use the large brush and cool water to thoroughly clean
inside the cylinder; be sure to scrub the back of the cylinder
and verify the cylinder is free of ALL product.
3. Thoroughly clean and dry the rear of the cylinder with the
supplied black brushes and a clean, dry towel.
4. Gently clean and wipe down the outside of the machine.
5. Carefully and thoroughly wash all parts removed from the
machine using supplied brushes, sponges, and clean towels;
6. Verify all parts are clean and free of all food product prior
to re-assembling machine.
Never wash parts in a dishwasher. Always
hand-wash components with nontoxic, food-safe
cleaners.
To Next Page
Loading...
