Name: SpeakerCraft MZC-66
Brand: SpeakerCraft
Rating: 5 (1 reviews)

To Next Page

To Previous Page

MZC-66 Hardware Installation Instructions Page 9

4. SNAP TABS – These tabs hold the decorator style insert panel to the metal mounting plate and are easily released for

changing buttons.

5. MOUNTING PLATE – Standard plate allows the keypad module to be attached to standard in-wall J-Boxes using the 2

screws provided. Also allows attachment of standard and screw-less, snap-on decorator type cover plates.

6. IR RECEIVER LENS – The MKP-1.1 includes SpeakerCraft’s exclusive ANS (Ambient Noise Suppressor) IR Receiver, built-in.

The IR Receiver allows use of a handheld remote for control of the system and IR controlled source components.

7. EZ-CONNECT TERMINALS – These seven spring-loaded terminals accept wire sizes 14 to 28 AWG for connection of

the following:

• +RELAY/–RELAY – For connection of the external EPR-1.0 EZ-Pad Relay Speaker Muting Module. (Refer to

Designated Relay Mute Key section and Figures 6 & 19).

• +12V DC – Powers the Keypad, including the internal IR Receiver on the MKP-1.1. Includes reverse voltage protec-

tion.

• IR/IO (Data) – Sends IR control signals for control of system components.

• GND – Return for Power, IR signal and Data.

• 485 A/485 B – Balanced, bi-directional system communications data.

8. FUNCTION BUTTONS – These lower 5 buttons (4 buttons on the MKP-1.1) are primarily used for volume, mute and

power, but can also be programmed for any function except source select. These buttons glow a low-level background

green and do not change color when pressed. Button background lighting can be programmed to go off after a set

time of inaction, or stay on continuously as programmed in EZ-Tools.

9. NUMERIC AND FUNCTION BUTTONS – These buttons are used for direct numeric access of discs and tracks, selec-

tion of tuner presets, transport functions and menu navigation. All numeric and function buttons, including those on

the Master Keypads, glow a low-level background green and do not change color when pressed. This background

lighting can be programmed to go off after a set time of inaction, or stay on continuously as programmed in EZ-Tools.

Other manuals for SpeakerCraft MZC-66

Questions and Answers:

Need help?

Do you have a question about the SpeakerCraft MZC-66 and is the answer not in the manual?

Audio Specifications