HEALTH CHECK – OFF, ON
(Allows the user to set MAIL STATUS periodically) : DAILY or WEELY or MONTHLY
VIDEO CLIP SETUP: Setup the duration of video clip for PRE RECORD and
POST RECORD.
EVENT AND NOTIFICATION – OFF, ON
(Allows the user to set EVENT NOFICIATION ON or OFF)
HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD
- Enable Email Notification in the event a problem occurs with the VT.
ALARM-IN – Enable Email Notification when the camera detects sensor.
MOTION DETECTION – Enable Email Notification when the camera detects motion.
VIDEO LOSS – Enable Email, Beep and Alarm output Notification when the camera
signal is lost.
HDD TEMPERATURE – Enable Email, Beep and Alarm output Notification when the
HDD temperature.
HDD BAD SECTORS – Enable Email Notification when the HDD has bad Sectors.
HDD ALMOST FULL – Enable Email Notification when the HDD is almost full
HDD FULL – Enable Email Notification when the HDD is full
To Next Page
Loading...
