85
7-7-6. User Management
Select the USER MANAGEMENT tab to set the DISPLAY conditions.
7-7-7. Storage
Select Storage to configure continued recording settings by overwriting the hard disk and the storage
period for the recording data.
OVERWRITE: Continues recording by writing over previous recordings when HDD is full.
DISK INFO: Shows the information of HDD installed in DVR
RECORDING LIMIT: Sets whether to limit or not, the recording data storage period.
7-7-8. Remote Upgrade
Shows the current Firmware version installed on DVR.
Browse: Select BROWSE to locate the firmware file.
Upgrade: Select UPGRADE to upgrade the firmware of the DVR.
To Next Page
Loading...
