Speco D4VT - Page 81

81
o SEND MAIL TEST: Examine the function with registered information.
 USER NAME: Name the DVR
 SYSTEM RESTART
 SYSTEM EVENT NOTIFICATION
Allows the user to set EVENT NOFICIATION ON or OFF
o HEALTH CHECK
(Allows the user to set MAIL STATUS periodically) : DAILY or WEELY or MONTHLY
o HDD TEMPERATURE
o HDD BAD SECTOR
o HDD ALMOST FULL
o VIDEO CLIP SETUP: Setting the duration for pre and post recording.
o EVENTS AND NOTIFICATION
o HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD
Enable Email Notification in the event a problem occurs with the VT.
o ALARM-IN : Enable Email Notification when the camera detects sensor
o MOTION DETECTION : Enable Email Notification when the camera detects motion
o VIDEO LOSS : Enable Email, Beep and Alarm output Notification when the camera signal is
lost.
o HDD TEMPERATURE : Enable Email Beep and Alarm output Notification when the HDD
reaches the maximum temperature
o HDD BAD SECTOR : Enable Email Notification when the HDD has bad sectors.
o HDD ALMOST FULL : Enable Email Notification when the HDD is almost full.
o HDD FULL : Enable Email Notification when the HDD is full.
o HDD FAILURE : Enable Email, Beep and Alarm output Notification when the HDD fails.