T200, T380, or T680 Transporter Replacement Access the Transporter
August 2012 Replacing the Transporter—Spectra T200, T380, and T680 Libraries
11
3. Using your fingers or a #2 Phillips screwdriver, loosen the two captive
screws securing the bottom of the library front panel to the chassis.
4. Lift the front panel outward and away from the chassis to disengage the
two nuts on the back of the front panel from the holes on either side of
the chassis. Set the cover aside.
Figure 6 Loosen the front panel captive screws.
Figure 7 Remove the front panel.
Alignment nut
on front panel
To Next Page
Loading...
