T200, T380, or T680 Transporter Replacement Complete the Replacement
August 2012 Replacing the Transporter—Spectra T200, T380, and T680 Libraries
32
Test the New Transporter
Perform the following test to confirm that the new transporter is
functioning properly. The test takes approximately 10 minutes.
1. Log into the library with superuser or administrator privileges.
2. Select Maintenance > Diagnostics. The Diagnostics screen displays.
3. Select All Motion Basic Tests. The Utilities screen refreshes to display
information about the selected diagnostic.
4. Click Run Diagnostic. Progress screens display as each test is run.
5. When all of the tests are complete, the Diagnostic Results screen
displays. Each of the individual tests run by the diagnostic has a report
of Success, Warning, or Fail.
If all of the tests results are Success, skip to Resume Library
Operations on page 33.
Figure 33 The All Motion Basic Tests Diagnostics screen.
To Next Page
Loading...
