Spectra T200 - Return the Component; Return Guidelines; Return Procedure

36
Return the Component
After you complete the replacement procedure, use the information in this
section when returning the defective component to Spectra Logic.
Return Guidelines
Unless Spectra Logic Technical Support informs you otherwise, return the
defective component to Spectra Logic as described in the following section.
If Spectra Logic Technical Support informs you that the component does
not need to be returned, dispose of it in the manner appropriate for your
company guidelines.
Return Procedure
Pack the defective component using ALL of the packaging that the
replacement part arrived in (including any anti-static bags or foam inserts).
Use the return label and instructions that were included with the
replacement part when preparing to ship the defective component. If you
cannot locate these, contact Spectra Logic for another copy (see Contacting
Spectra Logic on page 2). The return label and RMA printed on it are used
to associate the returned part with your account. To avoid being invoiced
for failure to return the part, do not ship the part back without the RMA
return label.
Caution
Severe damage can occur if the component is not packaged correctly, and you may
be invoiced if it is received with damage due to improper or insufficient packaging.