Spectra T200 - Page 26

T200, T380, or T680 Transporter Replacement Reassemble the Library
August 2012 Replacing the Transporter—Spectra T200, T380, and T680 Libraries
26
b. Angle the left edge of the shelf slightly upward so that the right
front tab clears the front edge of the chassis and then slide the shelf
into the chassis so that the top edges fit into the slots in the rear
mounting tabs and the front tabs fit into the slots in the front of the
chassis.
Caution
Make sure that the rear top edge of the shelf fits into the slots in both of the
mounting tabs. Incorrectly installing a shelf will cause motion failures.
Figure 25 Install a chamber shelf and correctly position it in the rear mounting tabs.
Front slot
Media guide (note
orientation)
Mounting tab
Incorrect position
Correct position