September 2022 Site Preperation Guide—Spectra T200, T380, and T680 Library
5
If the library is loaded with media packs (RXT media packs or media in TeraPacks),
Spectra recommends that the library not be moved. If you must move the library,
contact Spectra Logic Technical Support for recommendations before proceeding.
Use only the media approved by Spectra Logic for use in the drives installed in your
library. Improper media will result in damage to the drives, library, and media.
The library and components should be kept in their shipping boxes while moving
them to the installation location. If space for moving the boxes is not available,
contact Spectra Logic Professional Services for guidance.
Be cautious when moving the library and component shipping boxes. Use a pallet
jack to move the boxes on a level surface. Use a stair crawler or other special
equipment that can handle the weight of the boxes to traverse stairways.
When the library is moved from a cold environment to a warm environment, it
should not be used for at least 24 hours. This adjustment period prevents
condensation damage.
If you tilt the library, Spectra Logic is not responsible for any damage caused to the
library or its components, or for any damage caused to your site.
The library is designed to be used on parallel power only. If the power sources for the
dual AC inputs are not parallel, damage to the library could result.
To Next Page
Loading...
