30
2.3.6.4 WebDAV
The client can write operations in WebDAV directory with appropriate permissions. This page
shows information about the WebDAV Server. To set up WebDAV go to Advanced > Servers
> WebDAV.
1. From the navigation panel, go to Basic > Services > WebDAV.
2. Connect an external USB hard disk drive or USB flash drive to your WiFi Router, and your
device will be displayed here.
3. HTTP Access Port:
4. HTTPS Access Port:
5. Enable Outside Access:
The port to access the WebDAV server for HTTP protocol in the
local area network (default value: 80).
The port to access the WebDAV server for HTTPS protocol in the
local area network (default value: 443).
Select On/Off to enable/disable access to WebDAV server by wide
area network.
To Next Page
Loading...
