Spectrum 802.11ac Wave 2 User Manual

71
To add a folder:
1. Add new folder.
2. Enter a folder name. The folder that you created will be added to the folder list.
To set up permissions on the folder for WebDAV server:
1. From the list of folders, choose one of the shared folders and add the share name, then
choose the type of access permission that you want to assign for specific users:
·
R/W: Select this option to assign read/write access.
·
R: Select this option to assign read-only access.
2. Click Save Permission to apply the changes.
Refer to the following for the descriptions of the fields:
·
Enable Outside Access: Select On/Off to enable/ disable access to WebDAV server by
WAN (wide area network).
·
Outside Access: The port number of external service ports via HTTP (default value: 8080).
·
Outside Access HTTPS: The port number of external service ports via HTTPS
(default value: 8443).
·
Safely Remove Disk: Click to safely remove the disk. When the USB disk is ejected
successfully, the USB status shows 'No device '.
·
Click Save Permission.

Spectrum 802.11ac Wave 2 Specifications

General

Brand	Spectrum
Model	802.11ac Wave 2
Category	Network Router
Language	English