Spirax Sarco BC3250 - Page 66

IM-P403-89 EMM Issue 8
66
TDS - SP (Set Point)
Ranges 0 – FSD
Default 50% FSD
Resolution (steps) 0.1% FSD
Units µS / cm or ppm
TDS - HYST (Set Point hysteresis)
Ranges 0 – SP
Default 5% FSD
Resolution (steps) 0.1% FSD
Units µS / cm or ppm
TDS - CAL (Actual water TDS or conductivity to calibrate product)
Ranges 0 – FSD
Default 4000
Resolution (steps) 0.1% FSD
Units µS / cm or ppm
TDS - CAL INT (Calibration Interval – reminder to recalibrate product)
Ranges 0 – 26
Default 0 (0 = off)
Resolution (steps) 1
Units Weeks