IM-P337- 6 9 EMM Issue 2
13
4.1 Environmental conditions
Install the product in an environment that minimises the effects of heat, vibration, shock and electrical
interference (see Section 1 - 'Safety information').
Do not install the product outdoors without additional weather protection.
Caution: In order for the ILVA20 flowmeter to meet its specified accuracy and performance, it is essential
that the following guidelines for installation are followed carefully. For steam flow measurement, good basic
steam engineering practices should be followed as detailed in this manual.
Before lifting the ILVA20/MVT10, refer to Section 1.12, safe lifting of Spirax Sarco products.
Fig. 3 Top views showing lifting ports
See Section 1.12 for handling and lifting procedure
Lifting ports
Lifting points
4. Mechanical installation of ILVA20
pipeline unit
M12
M12
M12
M12
To Next Page
Loading...
Need help?
General
