IM-P323-32
CTLS Issue 5
11
SX80 and SX90 Quickstart Guide
1.9 Tools and consumables
Before starting work ensure that you have suitable tools and / or
consumables available. Use only genuine Spirax Sarco replacement
parts.
1.10 Protective clothing
Consider whether you and / or others in the vicinity require any
protective clothing to protect against the hazards of, for example,
chemicals, high / low temperature, radiation, noise, falling objects,
and dangers to eyes and face.
1.11 Permits to work
All work must be carried out or be supervised by a suitably
competent person. Installation and operating personnel should be
trained in the correct use of the product according to the Installation
and Maintenance Instructions. Where a formal 'permit to work'
system is in force it must be complied with. Where there is no such
system, it is recommended that a responsible person should know
what work is going on and, where necessary, arrange to have an
assistant whose primary responsibility is safety.
Post 'warning notices' if necessary.
1.12 Handling
Manual handling of large and / or heavy products may present a risk
of injury. Lifting, pushing, pulling, carrying or supporting a load by
bodily force can cause injury particularly to the back. You are
advised to assess the risks taking into account the task, the
individual, the load and the working environment and use the
appropriate handling method depending on the circumstances of
the work being done.
To Next Page
