IM-P323-32
CTLS Issue 5
12
SX80 and SX90 Quickstart Guide
1.13 Residual hazards
In normal use the external surface of the product may be very hot.
Many products are not self-draining. Take due care when dismantling
or removing the product from an installation.
1.14 Freezing
Provision must be made to protect products that are not self-
draining against frost damage in environments, where they may be
exposed to temperatures below freezing point.
1.15 Disposal
On disposal of the unit or component, appropriate precautions
should be taken in accordance with Local / National regulations.
Unless otherwise stated in the Installation and Maintenance
Instructions this product is recyclable and no ecological hazard is
anticipated with its disposal providing due care is taken.
Please visit the Spirax Sarco product compliance web pages
https://www.spiraxsarco.com/product-compliance
for up to date information on any substances of concern that may
be contained within this product. Where no additional information
is provided on the Spirax Sarco product compliance web page, this
product may be safely recycled and/or disposed providing due care
is taken. Always check your local recycling and disposal regulations.
1.16 Returning products
Customers and stockists are reminded that under EC Health, Safety
and Environment Law, when returning products to Spirax Sarco they
must provide information on any hazards and the precautions to be
taken due to contamination residues or mechanical damage which
may present a health, safety or environmental risk. This information
must be provided in writing including Health and Safety data sheets
relating to any substances identified as hazardous or potentially
hazardous.
To Next Page
Loading...
