IM-P323-32
CTLS Issue 5
8
SX80 and SX90 Quickstart Guide
Installation requirements for EMC
To comply with European EMC directive certain installation
precautions are necessary:
Relay outputs – It may be necessary to fit a suitable filter to suppress
conducted emissions.
Filter requirements depend on the type of load. Typical applications
may use
Schaffner FN321 or FN612.
Restriction of Hazardous Substances (RoHS)
Table 1 Restricted materials table
Product Toxic and hazardous substances and elements
SX80 and SX90 Pb Hg Cd Cr VI) PBB PBDE
PCBA X O X O O O
Enclosure O O O O O O
Display O O O O O O
O
Indicates that this toxic or hazardous substance contained
in all homogeneous material for this part is below the limit
requirement in SJ/T11363-2006.
X
Indicates that this toxic or hazardous substance contained in at
least on of the homogeneous material for this part is above the
limit requirement in SJ/T11363-2006.
Approval
Name: Position: Signature: Date:
Martin
Greenhalgh
Quality
Manager
To Next Page
Loading...
