EasyManua.ls Logo

SPORTSTECH sTread - Immediately after Use; Safety Stickers; Installation Instructions

SPORTSTECH sTread
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
2. Installation instructions
SAFETY STICKERS
The safety stickers must be at the positions shown in the following figure.
Make sure they are always intact and fully readable.
Made in China
SPORTSTECH
Distributed by:
Sportstech Brands Holding GmbH
Karl-Liebknecht-Str. 7, 10178 Berlin, Germany
Motorized Treadmill
Model: sTread
Rate Voltage: 220-240V
Rated Frequency: 50/60Hz
Power: 2200W
Frequency Band: 5khz ~ 5.3khz
Maximum Transmit Power radiated
in the Frequency Band: 0 dBm
Construction year: 2024
IMMEDIATELY AFTER USE
Turn off the switch next to the cable socket. Carefully disconnect the power cable from the device.
Perform a visual inspection again: Is the device clean and intact?
CLEANING, MAINTENANCE, ADJUSTING, STORING
Perform maintenance tasks and adjustments regularly, but only according to the instructions.
Never switch on the device in storage position.
Store the device and power cord out of the reach of children and animals.
Store the device in a dry, clean place protected from frost, heat and sunlight.
Tighten all individual parts and pre-assembled parts firmly!
Check the tightness again before each training session!
Perform the assembly with a second, adult and sufficiently strong person.
Also perform the adjustment of heavy assemblies with a second adult person.
Assembly now easy as pie, due to our video tutorial.
Scan the QR-code or access the link below:
https://sportstech.link/stread_assembly
SAFETY WARNING!
USEO NLYW ITHG ROUNDEDS OCKET.
SICHERHEITSWARNUNG!
NURG EERDETE STECKDOSEN NUTZEN.

Table of Contents

Related product manuals