25
DE
EN
2.10 UNFOLDING
To unfold, proceed as follows:
• Stand safely in front of the folded machine.
• Hold the rear end of the base unit with both hands.
• Gently push the locking spring forward with the toe of one foot. → The locking mechanism is
released.
• Gently lower the base unit until it touches the ground.
2.11 FOLDING AND STORAGE
The machine can be folded when not in use. Follow these steps:
• Carefully unplug the power cord from the power outlet.
• Using both hands, lift the rear end of the base unit upwards until the locking spring A holds the base
unit securely at the top.
• Check that the base unit is securely locked in this position.
• Store the device as described in „Cleaning, Adjustment and Storage“
A
To Next Page
Loading...
