SPORTSTECH sTread - Function Instructions

24
through the large hole in the mounting plate. Turn the four M5×10 Cross Recessed Truss Head Bolts
(S5) through the holes in the mounting plate into the threaded holes on the back of the monitor (G).
• Connect the connector of the cable (#162) to the connector on the monitor (G).
2.9 FUNCTION INSTRUCTIONS
M5x10
Cross Recessed Countersunk Head Bolts
x 4
S5
(G)
(B)
(F)
S5
162
Wireless Charging Area
USB-C Charging Port
USB Charging Port
Scroll up or down to
increase or decrease
the speed.
Scroll up or down to
increase or decrease
the incline.