3
2. GETTING STARTED
Carefully remove the machine and all accompanying parts from
the packaging.
Your package should contain the following:
• User manual
• Measuring spoon with assembly tool for lter
• 1 test strip for water hardness
• Milk container
Note: In the event that your machine needs to be returned,
Place the machine on a suitable, level and dry working surface.
Connect the machine to the mains supply by plugging into a
properly installed mains socket.
Your machine is tted with a power cord compartment. If
your machine is located close to the power socket, push any
unwanted cord back into the power cord compartment (Fig 1/R).
2.2 Controls
Before you set the basic settings and brew your rst coee, please
make yourself familiar with the main controls of your appliance.
(Fig.1/I): Press once to switch the machine on,
press again to turn it o.
(Fig. 1/B): By repeatedly pressing
the bean symbol, the strength changes from mild (one bean on
display), to normal (two beans), to strong (three beans); then
restarts again with mild. By turning clockwise, the volume per
cup is increased. By turning anti-clockwise it is reduced.
(Fig. 1/C): Place a cup under the steam/
hot water spout/frothing device (Fig. 1/K). Turning the knob all the
way clockwise, opens the valve for steam or hot water, according
to selection. Turning it anti-clockwise closes the valve.
(Fig. 1/D): Before pressing the
button, place one or two cups under the height-adjustable spout
(gures 7 and 8). Pressing once dispenses one cup, pressing
twice in quick succession dispenses two cups.
(Fig. 1/E): When the symbol S10
illuminates on the display (Fig. 1/A), press the button to start the
rinsing process. If the symbol S10
does not show, press to
start the steam heating process. Holding the button for more
2. GETTING STARTED
DOWN
UP
i
To Next Page
Loading...
