22
8. CUSTOMER SERVICE, WARRANTY, TECHNICAL DATA
SPRADA products are designed to meet the highest quality standards.
If you have any questions as to the operation of your machine, please
consult your retailer or contact the SPRADA customer service centres.
Please visit our website, www.sprada.ch for additional information on
this product.
Please keep the original packaging. It will serve as protection should
you need to ship the machine for service. The manufacturer will
assume no liabilities for damage in transit.
Please dispose of lters with domestic waste.
9. WARRANTY
Your SPRADA machine is a precision machine manufactured to the
highest European standards and is guaranteed against manufacturing
defect for a period of one year from the date of purchase or until it
has made 7 500 cups (whichever comes rst). The machine is not
guaranteed against damage caused by normal wear and tear, neglect
or misuse arising from operation not in accordance with that described
in this manual or lack of routine cleaning as speci ed. Furthermore
it is not guaranteed against damage caused by power uctuations,
surges or lightning strikes.
To ensure that your guarantee is valid, please retain your proof of
purchase.
Should you wish to claim under warranty, please return the machine
in its original packaging and power plug together with a detailed
description of the fault to a SPRADA service centre. Upon receipt,
technicians will inspect the machine and deliver a full report on
the probable cause of the defect. Should this be attributed to a
manufacturing fault, the machine will be repaired at no charge.
Should the fault have been caused by circumstances not covered
by the guarantee, a quotation will be submitted for the repair. Courier
fees will be for the account of the purchaser.
Mains voltage: 220 - 240 V
Power requirement: 1455 W
Brewing pressure: 15 BAR
SPRADA is a registered trademark of
FOGHOUND INTERACTIVE CC
24 Richards Drive, Halfway House, Midrand, 1685
+27(0)11 541 0000 / +27(0)87 943 7177
www.sprada.ch
To Next Page
Loading...
