18
The brew unit can be removed and cleaned under cold, running
water. Never use any cleaning agent, but clear, cold water. For
hygienic reasons, we recommend the removal and cleaning of the unit
thoroughly after each run of the cleaning programme (see point 4.2).
Open and remove the service door on the right of the casing
(Fig. 1/L).
Remove the brew unit by pressing in the red button and turning
the handle all the way to the left until it snaps into place (Fig. 11).
Carefully remove the brew unit using the handle.
Clean the brewing unit under cold running water and let it dry.
Re-insert the brewing unit carefully and lock by pressing in the
red button and turning the handle all the way to the right until it
snaps into place.
Close the service door. Carefully place the pivots at the back
of the door into the notches. Make sure that the door (Fig. 1/L)
completely snaps back into place.
4. CLEANING AND MAINTENANCE
!
To Next Page
Loading...
