11
Turn the strength/volume selector (Fig. 1/B) to the water volume
required for one cup.
Open the hinged lid of the coee powder chute located at the
top of the right hand side panel (Fig. 1/M). Symbol S4
is
shown.
Pour in one level measuring spoon of ground coee and close
the lid.
Symbol S4
is flashing.
Place one or two cups under the coee spout (gures 7 or 8)
and press the coee button (Fig. 1/D) once or twice respectively.
The machine will start pre-brewing and brewing - without grinding.
not pour in more than one portion of coffee and only use fresh
instant coffee.
Hold a cup under the steam/hot water spout/frothing device
(Fig. 1/K).
Turn the steam/hot water control (Fig. 1/C) clockwise.
Fill the cup with the required water and turn the knob back anti-
clockwise to position 0.
start the process.
the rubber parts.
i
3. MAKING COFFEE
!
!
!
To Next Page
Loading...
