20
FAULT MEANING WHAT TO DO
No hot water or steam Blocked steam/hot water spout/
frothing device (Fig.1/K)
System may be calcied
Dismantle and thoroughly clean
steam/hot water spout/frothing
device (Fig.2)
Run a high dosage of descaler
(see point 4.3)
Not enough milk froth or
liquid froth
Unsuitable milk Use cold milk
Blocked steam/hot water spout/
frothing device
Dismantle and thoroughly clean
steam/hot water spout/frothing
device (Fig.2)
Coee only drips System may be calcied Run a high dosage of descaler
(see point 4.3)
Coee is too nely ground Set the grinder to a coarser
setting
Coee powder too ne Change to coarser coee
powder
No “crema” on the coee Unsuitable coee beans Change coee beans
Beans may be too old
Grinding coarseness not adjusted
to suit the beans
Change to fresh beans
Optimise grinding coarseness
Strong noise from coee
grinder
Foreign matter in grinder e.g.
small stones
Call service centre, ground
coee can still be made
In the event of not being able to correct a fault or malfunction, or not being
able to clear a fault message, call a SPRADA customer service centre.
If the system detects any errors, the display will show an error report:
• ashing bars or
• lit bars
and error number.
6. TROUBLESHOOTING
!
To Next Page
Loading...
