17
Remove the drip tray with the used coee grounds container
(gures 1/N and Q) and empty both.
Re-insert the drip tray and used coee grounds container.
The machine briey heats up. It is ready for use again when the bean
symbols are displayed.
If required, the descaling programme can also be started and run as
described above without the prompt of symbol S7
.
Empty the drip tray and the used coee grounds container
regularly (gures 1/N and Q). The red oating indicator at the
back of the drip tray (Fig. 1/P) shows the level.
Only use a soft, damp cloth for cleaning the casing inside and
outside.
Empty drip tray and used coee grounds container (g. 1/N and
Q) when this is indicated on the display (only when the machine
is switched on).
Occasionally use a little soapy water for cleaning.
The water tank should be rinsed daily with clear water and then
re-lled daily with fresh, cool water.
4. CLEANING AND MAINTENANCE
i
i
!
!
!
To Next Page
Loading...
