34
Hose Installation
Install the hood cover onto the hood.
Install the brake lever onto the handlebar in the desired position and
tighten.
Route the new hose through or onto the frame according to the frame
manufacturer's instructions. Install the shifter cable to the derailleur(s)
according to the user manual at www.sram.com/service.
To shorten the hose, hold the hose at the caliper with a length that
creates a gentle bend in the hose and allows the handlebar to freely
turn from side to side.
Mark your cut location, then cut the hose.
8
9
To Next Page
Loading...
