5
Pull the cable head to remove the cable from the remote system.
CABLE INSTALLATION
1
If replacing the cable housing, detach the cable housing and end
caps from the lever and the cable housing stop on the fork.
Attach the new housing and end caps to the remote lever and the
cable housing stop on the fork. Cut a length of shifter housing to
accommodate travel and suspension movement.
2
Hold the remote lever in and install the new shifter cable through
remote. Install the cable housing onto the new shifter cable.
3
Pull the cable until the cable head is seated in the remote lever.
With the cable head seated in the remote lever, close the cable
hatch cover and push the lever to return it to the unlocked
position.
25
CABLE INSTALLATION
To Next Page
Loading...
