50
ELECTRICAL CONNECTION INSTRUCTIONS
7. ELECTRICAL CONNECTION INSTRUCTIONS
7.1 Wiring Rules and Warnings
WARNING: All aspects of the installation must conform with the requirements of the Standards Australia (within
Australia) Wiring Rules as well as your local electrical and building codes and regulations and any
other applicable requirements and conditions of your Local Power Supply Authority.
A licensed electrician must perform the electrical work when installing this appliance. The supply
cable and fuse rating must be suitable for the appliance.
WARNING: To avoid mains borne interference, this appliance must be installed individually on a separate and distinct
final sub-circuit.
NOTE: To the Electrician - please ensure sufficient supply cable is provided to allow the appliance to be removed from
the cavity should any servicing be necessary. This will also allow easy connection of the supply.
7.2 Electrical Loads
MAIN OVEN UEO DEO UES
Oven (Max.) 3800 W 3800 W 4200W
Grill 2700 W 2700 W 3500W
Oven Fan and Light 100 W 100 W 100W
SECONDARY OVEN
Oven – 2400 W –
Grill – 2700 W –
Oven Light – 30 W –
Total Rating 3.9 kW 6.63 kW 4.3 kW
When connected to a subcircuit protected by a circuit breaker, the current drawn by an oven may cause the
circuit breaker to trip in some cases. It is recommended that the following installation procedures are used.
To Next Page
Loading...