UM1075 Rev 10 19/20
UM1075 Revision history
19
7 Revision history
Table 7. Document revision history
Date Revision Changes
22-Apr-2011 1 Initial release.
03-Jun-2011 2
Table 2: SWIM flat ribbon connections for ST-LINK/V2: added
footnote 1 to the function “Target VCC”.
Table 4: JTAG/SWD cable connections: added a footnote to the
function “Target VCC”.
Table 5: How third-party toolchains support ST-LINK/V2: updated the
“Versions” of IAR and Keil.
19-Aug-2011 3 Added USB driver details to Section 5.3.
11-May-2012 4
Added SWD and SWV to JTAG connection features. Modified
Table 4: JTAG/SWD cable connections.
13-Sep-2012 5
Added ST-LINK/V2-ISOL order code.
Updated Section 4.1: STM8 application development on page 15.
Added Note 6 in Table 4.
Added Note “For low-cost applications...” before Section 3.3: ST-
LINK/V2 status LEDs on page 14.
18-Oct-2012 6 Added Section 5.1: ST-LINK/V2 firmware upgrade on page 15.
25-Mar-2016 7 Updated V
RMS
value in Introduction and Features.
18-Oct-2018 8
Updated Table 4: JTAG/SWD cable connections and its footnotes.
Minor text edits across the whole document.
09-Jan-2023 9
Updated Introduction, Features, and Section 5.3: STM32 application
development and flash programming.
Updated Table 5: How third-party toolchains support ST-LINK/V2.
Minor text edits across the whole document.
03-Apr-2024 10
Former Table 4 JTAG/SWD cable connections splitted in Table 4:
JTAG/SWD cable connections on STLINK-V2 and Table 5:
JTAG/SWD cable connections on STLINK-V2-ISOL.
To Next Page
Loading...
