ST STM32F10 Series Application Note

General information
6/29 AN2586 Rev 8
1 General information
This document applies to STM32F10xxx microcontrollers, based on Arm
®
Cortex
®
cores.
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or
elsewhere.
Glossary
Low-density value line devices are STM32F100xx microcontrollers where the flash
memory density ranges between 16 and 32 Kbytes.
Low-density devices are STM32F101xx, STM32F102xx and STM32F103xx
microcontrollers where the flash memory density ranges between 16 and 32 Kbytes.
Medium-density value line devices are STM32F100xx microcontrollers where the flash
memory density ranges between 64 and 128 Kbytes.
Medium-density devices are STM32F100xx, STM32F101xx, STM32F102xx and
STM32F103xx microcontrollers where the flash memory density ranges between 64 and
128 Kbytes.
High-density value line devices are STM32F100xx microcontrollers where the flash
memory density ranges between 256 and 512 Kbytes.
High-density devices are STM32F101xx and STM32F103xx microcontrollers where the
flash memory density ranges between 256 and 512 Kbytes.
XL-density devices are STM32F101xx and STM32F103xx microcontrollers where the
flash memory density ranges between 768 Kbytes and 1 Mbyte.
Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers.

ST STM32F10 Series Specifications

General

Brand	ST
Model	STM32F10 Series
Category	Microcontrollers
Language	English