1 Features
• Ultra-low-power STM32U083MC microcontroller based on the Arm
®
Cortex
®
‑M0+ core, featuring
256 Kbytes of flash memory and 40 Kbytes of SRAM in an LQFP80 package
• 4×24-segment LCD
• Three user LEDs
• Reset push-button
• User joystick
• Touchkey
• Temperature sensor
• Board connectors:
–
ST-LINK USB Type-C
®
connector
–
User USB Device with USB Type-C
®
connector
–
mikroBUS
™
connectors
–
MIPI
®
debug in connector (Arm
®
Cortex
®
10‑pin 1.27 mm‑pitch debug connector over STDC14
footprint)
– Extension connectors for full access to all STM32 I/Os
– VBAT dedicated connector provides the capability to power the board on a battery
• Flexible power-supply options: ST-LINK USB V
BUS
, USB connector, or external sources
• VDD power supply at 1.8 or 3.3 V by step-down converter
• On-board STLINK-V2EC debugger/programmer with USB re-enumeration capability: mass storage, Virtual
COM port, and debug port
• Comprehensive free software libraries and examples available with the STM32Cube MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded
Workbench
®
, MDK-ARM, and STM32CubeIDE
Note: Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
UM3292
Features
UM3292 - Rev 1
page 2/33
To Next Page
Loading...
