List of tables
Table 1. Ordering information..................................................................3
Table 2. Codification explanation ...............................................................3
Table 3. ON/OFF convention ..................................................................5
Table 4. Default jumper configuration ............................................................6
Table 5. STDC14/MIPI10 connector (CN4) (SWD only) ............................................... 11
Table 6. TAG10 connector (CN2) (SWD only) ..................................................... 11
Table 7. Power source capabilities .............................................................12
Table 8. VCP communication ................................................................ 15
Table 9. Joystick position for the ADC value ...................................................... 16
Table 10. Jumper configuration ................................................................ 17
Table 11. LCD pinout .......................................................................18
Table 12.
USB Type-C
®
FS GPIO configuration ..................................................... 19
Table 13. Hardware I/O configuration for the touchkey button interface ..................................... 20
Table 14.
ARDUINO
®
connectors on STM32U083C-DK ............................................... 22
Table 15. Pin assignment for the STM32 on the extension connectors .....................................23
Table 16.
Description of the mikroBUS
™
connector pins ............................................... 24
Table 17. Product history ....................................................................26
Table 18. Board revision history ................................................................26
Table 19. Document revision history .............................................................28
UM3292
List of tables
UM3292 - Rev 1
page 31/33
To Next Page
