MC521 PRO Control Box
03.23.2017
1.800.7.ACCESS • www.stanleyaccess.com • Document # 204090 REV D 11
Copyright 2017 Stanley Access Technologies, LLC. All rights reserved. Reproduction
in whole or in part without the express written permission of Stanley is prohibited.
Step 5: If addional conguraon is needed
press CONFIGURE DOOR.
Step 6: Congure addional sengs and press
UPDATE aer each seng has been changed.
Once completed press BACK to return to
the Main Selecon menu. Motor 1 and
Motor 2 have independent sengs.
Step 7: Press BEGIN AUTOCONFIGURE. Step 8: Press NEXT.
Step 9: Put Funcon switch to Hold Open
momentarily and then back to Closed.
Step 10: If the door requires addional changes
to be made to the sengs, select
CONFIGURE DOOR .MANUAL.
5
6
7
8
10