Star DP8340 SERIES - Page 21

– 17 –
CODE
FS
(1C)
H
FUNCTION
Trigger peripheral unit drive (immediate)
OUTLINE
Causes a peripheral drive pulse to be generated immediately
CODE
ENQ
(05)
H
FUNCTION
Enquiry
OUTLINE
When this code is received, the printer outputs status data.
If it is input after text data input in the STX-ETX mode, the
printer outputs status data and the check byte.
CODE
STX
(02)
H
FUNCTION
Start of text
OUTLINE
When this code is received, the printer enters the STX-ETX
mode. This code is ignored if received when STX-ETX mode
is already in effect.
CODE
ETX
(03)
H
FUNCTION
End of text
OUTLINE
When this code is received, the printer leaves the STX-ETX
mode. Contents of the data buffer is printed, this code is
ignored if received before ENQ.
CODE
CAN
(18)
H
FUNCTION
Clears print buffer
OUTLINE
Upon input of this code the data buffer and line buffer is
cleared.