– 16 –
CODE
ESC @
(1B)
H (40)H
FUNCTION
Printer initialization
OUTLINE
All printing conditions except ESC BEL n1 n2, the line buffer
and data buffer are set to the power on default condition.
CODE
ESC BEL n1 n2
(1B)H (07)H n1 n2
FUNCTION
Sets peripheral unit drive pulse duration.
OUTLINE
This command sets the pulse duration for peripheral unit
drive (Paper Cutter, Take-Up Device, cash drawer, etc.)
Pulse Duration = 10 × n
1 (ms)
Delay = 10 × n
2 (ms)
1
n1 127; 1 n2 127
Default value: n
1 = n2 = 20
Executed by BEL code and FS code after printing.
CODE
BEL
(07)
H
FUNCTION
Trigger peripheral unit drive (Deferred)
OUTLINE
Causes a peripheral drive pulse to be generated. This code is
normally stored in the buffer and is performed as it is received
from the data queue.
To Next Page
Loading...
