StarTech.com PM1115U2 - Software Operation and Management; Accessing the Web Interface

23
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Performing a Hard Factory Reset
1. Insert the tip on a pen into the Recessed Reset button on
the side of the Print Server.
2. Gently press and hold the Recessed Reset button for 5
seconds to reset all settings back to factory defaults.
Software Operation
Accessing the Web Interface
1. Navigate to a web page and enter the Print Server’s IP
Address.
2. The Network Print Server screen will appear.
Changing the Screen Language
1. From any screen on the Network Print Server Web
Interface, click on the Select Language drop-down list.
2. Select the desired language from the drop-down menu.
Select Language Drop-Down