StarTech.com PM1115U2 - Restarting the Print Server Device

27
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. Click the Clear button to clear a Password if one has been
entered in the Password eld.
Restarting a Device
1. From any screen on the Network Print Server Web
Interface, click on the Restart Device Link.
2. The Restart Device screen will appear.
Restart Device Screen
3. Enter the user dened password in order to restart the
device.
Note: If no password has been created a password is not
required to restart the device.
4. Click the Submit button to restart the device.
5. Click the Clear button to clear a Password if one has been
entered in the Password eld.