Steca StecaGrid 2010+ Slave User Manual

Installations- und Bedienungsanleitung
Installation and operating instructions
Instructions d'installation et de service
StecaGrid 2010+ Master/Slave
StecaGrid 2010+ Maître/Esclave
734.843 | Z04 | 10.48
PHOTOVOLTAIK - PHOTOVOLTAIC - PHOTOVOLTAIQUE - FOTOVOLTAICA
DE / EN / FR

Steca StecaGrid 2010+ Slave Specifications

General

Brand	Steca
Model	StecaGrid 2010+ Slave
Category	Inverter
Language	English

Summary

Safety

2.1 Proper use

Specifies the intended use of the inverter within permitted ranges and ambient conditions.

2.2 Improper use

2.3 Dangers during installation and commissioning

Outlines risks like electrocution and fire during installation and setup procedures.

2.4 Dangers during operation

Installation

4.1 General requirements for installation

4.2 Notes on installation

4.3 Installation

Details the physical mounting process of the inverter vertically on a wall.

4.4 Connecting (AC) the master inverter

Step-by-step instructions for connecting the AC power cable to the master inverter.

4.5 Connecting (AC) the slave inverter(s)

Instructions for connecting the AC power cable to the slave inverters.

4.6 Connecting (DC) master and slaves

Guides on connecting the DC input from PV modules to both master and slave inverters.

4.8 Switching the grid voltage on for the first time

4.10 Deinstalling a Slave Inverter

4.11 Deinstalling a Master Inverter

Operating the StecaGrid

5.1 Operation and fault display via an LED

Troubleshooting

6.1 Fault messages

Lists and explains various fault messages displayed by the inverter.

6.2 Troubleshooting

Provides guidance on correcting faults, primarily focusing on fuse replacement.

Technical data